Setting up the SCOPIA Elite 5200 Series MCU | 16
RADVISION | Installation Guide for SCOPIA Elite 5200 Series MCU Version 7.5
Step 3
Check the network connection by verifying that the right LED on the Ethernet connector is lit
green.
Figure 3-9
The MCU Front Panel LEDs
Step 4
Verify that the MCU is ready to be used by creating a conference:
a.
From an endpoint dial the MCU IP address.
You access the MCU auto attendant service which plays the video and audio prompts.
b.
Press 0 to create a new conference.
c.
At a prompt, enter the meeting ID and press #.
The MCU creates the conference and you see the Conference window.
d.
Exit the conference by disconnecting the call.