Radio Thermostat CT200, Руководство пользователя

Страница: 11 / 50

Wiring
Vivint Element CT200 Installation Guide
Connecting Your Wires
Reference the Detailed Wire Diagram on page 23 to identify your
wiring diagram and set-up information If necessary, contact
customer support for help
1 Connect a labeled wire only to a matching lettered terminal
2 Press the lever next to the terminal letter, then insert the wire in
the terminal well
3 Make sure to insert the wire into the terminal well as far as it will
go, then release the lever The wire should be secure and not pull
free easily
The Thermostat can be externally powered with a power
source rated from 12V to 24V, AC or DC, at 100ma or
greater If used, connect to the C and RH terminals (no
polarity)
The 24VAC “C” wire is the other side of the 24VAC heating
transformer and can be found where the other thermostat
wires connect at the wall or at the furnace Do not use the
common or ground side of the line voltage
The Thermostat runs on 4 AA alkaline batteries, the C wire
(if available), or both batteries and the C-wire If you do not
have a C wire, you can run a new wire from the HVAC or
use a standard 12-24V [AC or DC] wall transformer
The C-wire is optional but preferred for all installations
C
W
RH
G
Y
Example of 5 Wire
Heat/Cool System
11