Radio Thermostat CT200, Руководство пользователя, Страница: 33 / 50

Customization
Vivint Element CT200 Operation Guide
COMFORT
Comfort settings enable you to control:
Calibration:
Offsets the unit’s temperature display
Cycling:
This feature enables you to set the acceptable variance in
temperature between the Thermostat’s setting and the
current room temperature before the heating or cooling
system will turn on The Cycling range can be from 0 5
to 4 0F ( 25 to 2C) For example, if Cycling is set to 2 0°F
and the Thermostat is set to 70°F target temperature, the
heat cycle will start when the room temperature drops to
68°F Similarly, the cooling system will start when the room
temperature increases to 72°F The HVAC runs until the
room reaches the target temperature, and then shuts off.
Staging:
Used for multiple stage systems only Staging is the number
of degrees between the room temperature and the target
temperature at which the next stage in multi-stage systems
will engage to bring the room temperature back to the
target The default is 2°F The programmable range is 2°F
to 6°F (1°- 3°C)
Calibration
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Installer, then press the SIDE button
3 Press DOWN to highlight Comfort, then press the SIDE button
4 Press DOWN to highlight Calibration, then press the SIDE button
The current temperature offset displays.
5 Press UP or DOWN to change the value, then press the SIDE
button to confirm.
Cycling
1 From the Home screen, press and hold the SIDE button for three
(3) seconds
2 Press DOWN to highlight Installer, then press the SIDE button
3 Press DOWN to highlight Comfort, then press the SIDE button
4 Press DOWN to highlight Cycling, then press the SIDE button The
current cycling value displays
5 Press UP or DOWN to change the value, then press the SIDE
button to confirm.
33