background image

Model

Programming Choices

1F95-1280

7 Day

5/1/1 Day

Non-Programmable

Big Blue Commercial Universal Thermostat 

with Damper or Economizer Control and 

Automatic Heat/Cool Changeover Option

Single Stage, Multi-Stage, Heat Pump

Installation and Operating Instructions

APPLICATIONS

1F95-1280

SPECIFICATIONS

Electrical Rating:
 

Battery Power  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   mV to 30 VAC, NEC Class II, 50/60 Hz or DC

 Input-Hardwire   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   20 to 30 VAC
Terminal Load   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   1 .5A per terminal, 2 .5A maximum all terminals combined
Setpoint Range   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   45 to 99°F (7 to 37°C)
Rated Differentials:                                                       Fast 

Slow

 

Heat (SS1, MS2)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   0 .6°F 1 .5°F

 

Cool (SS1, MS2) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1 .2°F 

1 .7°F

 

Heat Pump (HP1, HP2)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1 .2°F 

1 .7°F

 

Emer Heat (HP1, HP2)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  0 .6°F 

1 .7°F

Operating Ambient .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   32°F to +105°F (0 to +41°C)
Operating Humidity   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   90% non-condensing max .
Shipping Temperature Range   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   -40 to +150°F (-40 to +65°C)
Dimensions Thermostat .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   4-9/16"H x 5-13/16"W x 1-3/16"D

To prevent electrical shock and/or equipment damage, 
disconnect electric power to system at main fuse or 
circuit breaker box until installation is complete.

CAUTION

!

Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS 
CAREFULLY BEFORE INSTALLING OR OPERATING THIS 
CONTROL COULD CAUSE PERSONAL INJURY AND/OR 
PROPERTY DAMAGE.

THERMOSTAT APPLICATION GUIDE

Thermostat 

Configuration 

Options

Thermostat 

Applications

Maximum 

Stages

Heat/Cool

W/ Economizer

Max. Stage

Heat/Cool

Single Stage 1

No Heat Pump (SS1)

Gas, Oil, Electric, Heat Only, 

Cool Only or Heat/Cool 

Systems, 2 or 3 wire Hydronic 

Zone (Hot Water or Steam) 

Systems, 24 Volt or Millivolt

1/1

1/2

Multi Stage 2

No Heat Pump (MS2)

2/2

2/3

Heat Pump 1

Single Stage 

Compressor Heat 

Pump (HP1)

Single Stage Compressor Heat 

Pump Systems - up to 2 Stages 

Aux ./Emergency Heat

3/1

3/2

Heat Pump 2

Two Stage or Two

Compressor Heat 

Pump (HP2)

Two Stage or Two Compressor 

Heat Pump systems - up to 2 

Stages Aux ./Emergency Heat

4/2

4/3

ATTENTION: MERCURY NOTICE

This product does not contain mercury . However, this prod-
uct may replace a product that contains mercury .

Mercury and products containing mercury must not be 
discarded in household trash . Do not touch any spilled mer-
cury . Wearing non-absorbent gloves, clean up any spilled 
mercury and place in a sealed container . For proper disposal 
of a product containing mercury or a sealed container of 
spilled mercury, place it in a suitable shipping container . 
Refer to 

www.thermostat-recycle.org

 for location to send 

the product containing mercury .

Index

Page

Installation

2

Wiring Diagrams

3

Thermostat Quick Reference

4

Installer Configuration Menu

5

Operating Your Thermostat

9

Programming

10

Troubleshooting

14

www .white-rodgers .com

www .emersonclimate .com

PART NO. 37-7292A

Replaces 37-6978C

1134

Содержание 1F95-1280

















Отзывы: