1. OPERATION
1-51
1.34
Markers
1.34.1
[MARK] menu
The [MARK] menu lets you:
• Change the configuration of the own ship mark
• Show or hide the stern mark
• Set the reference point for the offset EBL
• Activate VRM with the offset EBL
1. Open [MAIN MENU], click [MARK].
2. Click the item.
3. Click the required option.
4. Click outside the menu window to close the menu.
1.34.2
Heading line
The heading line indicates the ship's heading in all orientation modes. The heading
line is a line from the own ship position to the outer edge of the radar display area and
appears at zero degrees on the bearing scale in head-up mode. It changes its orien-
tation depending on the ship orientation in north-up and true motion modes.
How to hide the heading line temporarily
To temporarily hide the heading line to look at targets existing dead ahead of own ship,
press the
HL OFF
key on the control unit. Release the key to redisplay the heading
line, etc.
[OWN SHIP MARK]
Select the shape of own ship mark.
[STERN MARK]
Select on/off the stern mark display.
[EBL OFFSET BASE]
([SEA] mode only)
[VRM SYNC OFFSET EBL]
([SEA] mode only)
Turn this feature on to automatically activate applicable
VRM when using an offset EBL.
[MARK] menu ([SEA] mode)
[MARK] menu ([RIVER] mode)
[MARK]
1 BACK
2
OWN SHIP MARK
MIN/RECTANGLE/
PENTAGON
3 STERN
MARK
OFF/ON
[MARK]
1 BACK
2
OWN SHIP MARK
MIN/RECTANGLE/
PENTAGON
3 STERN
MARK
OFF/ON
4
EBL OFFSET BASE
STAB GND/STAB HDG/
STAB
NORTH
5
VRM SYNC OFFSET EBL
OFF/ON
