1. OPERATION
1-47
How to change the range on dual radar display
When the dual radar display function activates, the range of the main radar is applied
to the external radar display. The range is mutually changed between the main and
external radars.
Transition of range change
1.31.2
How to select the reference radar
Select the radar to use a the reference radar, own radar external radar.
Note:
You can set this menu item radar when [DUAL RADAR] is [OFF].
1. Open [MAIN MENU], click [COMBINE RADAR].
2. Click [COMBINE MODE].
3. Click [OWN] or [EXT].
[OWN]: Set own radar’s antenna as reference point and set display area of own
radar. The area outside that set here is where the image from the external radar
will be displayed.
[EXT]: Set external radar’s antenna as reference point and set display area of ex-
ternal radar. The area outside that set here is where the image from own radar will
be displayed.
4. Click outside the menu window to close the menu.
Main
0.5 NM
Main
0.5 NM
[DUAL RADAR]
setting:
[COMBINE]
Changed range
of “
Main
” radar
to
1.0 NM
Changed range of
“
External
” radar
to
2.0 NM
External
0.5 NM
External
0.5 NM
Main
0.5 NM
Main
0.5 NM
External
0.75 NM
External
0.75 NM
Main
1.0 NM
Main
1.0 NM
External
1.0 NM
External
1.0 NM
Main
2.0 NM
Main
2.0 NM
External
2.0 NM
External
2.0 NM
[COMBINE MODE]: [EXT]
[COMBINE MODE]: [OWN]
Picture from
external radar
Antenna position of
external radar
Antenna position of
own radar
Picture from own
radar
