Racepak 250-DS-IQ3SL, Руководство по установке, Страница: 50 / 63

IQ3 Street Logger Dash Installation Manual
50
Configuring the Record Parameters
The first step to programming the record parameters to your data logger is to connect your data logger to
your PC using the serial communications cable supplied with your data logger. Once the logger is connected
turn on power to your data logger.
Next, start the DataLink II program and open the car configuration file. You can do so by clicking on
File from the Menu bar, and selecting Open Car Configuration. Select the configuration file
named IQ3_Street_Config, and click OK.
Next, position the mouse cursor over the IQ3 Street Logger channel button, and click the right
mouse button (shown below). The logger edit dialog box will be displayed (shown below).
Located in the top of the dialog box are tabs, locate and click on the Dash Info tab
Next locate the Custom Programming Options area of this window
To select an option for editing, simply position the mouse cursor over the option and click the left mouse
button. The option will become highlighted. The options channel dropdown box and option help box,
located to the right of the list, will be updated with appropriate information for the selected option. Read
the help information, and enter the new value for the selected option. The options for setting the record
parameters are discussed in detail below.