Racepak 250-DS-IQ3SL, Руководство по установке, Страница: 15 / 63

IQ3 Street Logger Dash Installation Manual
15
4 Parking Brake White
Connect to the parking brake switch on the vehicle.
Grounding this input will cause the parking brake indicator on
the dash to turn on
5 High Beam Brown
Connect to the high beam circuit on the vehicle. Applying
power to this input will cause the high beam indicator to turn
on.
6
Tail Lights
(Dim lighting)
Light Green
Connect to the head or tail light signal circuit on the vehicle.
Applying power to this input will cause the IQ3 to go into
night mode
(dimmed settings for all lights will be used).
7 Not Used N/A
8
External Shift
Light
Orange/White
Optional, if an external remote shift light is desired. Connect
to the negative side of the
shift light. Apply a fused 12 volt power source that is hot only
when the ignition switch is on to other terminal on shift light.
This output
applies ground to the circuit when shift point values are met.
750mA ground sink maximum
9 Not Used N/A
10 Not Used N/A
11 Not Used N/A
12 Not Used N/A
13 Not Used N/A
14 Not Used N/A
15 Not Used N/A
16 Not Used N/A
17 CAN High Yellow CAN High for ECU connections if applicable