Racepak 250-DS-IQ3SL, Руководство по установке, Страница: 23 / 63

IQ3 Street Logger Dash Installation Manual
23
Setting as
Displayed on
Dash
Program
Setting Description
Programming
Command
Accept and
Advance Accept and
Exit
SET DEFAULTS
Resets all dash settings to factory
default values
N = No
Y = Yes
Auto saves and exits when selected-
All settings and pages are set back to
as factory shipped, except for
hour/service and odometer values
Short Press Button 2
to toggle between
Y/N
Short Press
Button 1
Long Press
Button 1
SET TIME/DATE
Adjust time of clock feature
N = No
Y = Yes
If Yes is selected and accepted,
Button 2 increases time
Button 1 accepts value, moves to
minutes, AM/PM etc
Short Press Button 2
to toggle between
Y/N
Short Press
Button 1
Long Press
Button 1
BACKLIGHT
Backlight Brightness
0 = Off
10 = Maximum Brightness
Factory Default is 7
Short Press Button 2
to increase value
Short Press
Button 1
Long Press
Button 1
DIM BACKLIGHT
Dim Backlight Brightness
0 = Off
10 = Maximum Brightness
Factory Default is 3
Dim refers to state when pin 6 has
power applied to it.
Short Press Button 2
to increase value
Short Press
Button 1
Long Press
Button 1
LED BRITE
Onboard shift/warning LED
Brightness:
1 = Minimum Brightness
10 = Maximum Brightness
Factory Default is 7
Short Press Button 2
to increase value
Short Press
Button 1
Long Press
Button 1
DIM LED BRITE
Onboard shift/warning Dim LED
Brightness:
1 = Minimum Brightness
10 = Maximum Brightness
Factory Default is 3
Short Press Button 2
to increase value
Short Press
Button 1
Long Press
Button 1
EXT WARN
BRITE
External Warning Light Brightness:
1 = Minimum Brightness
10 = Maximum Brightness
Factory Default is 7
Short Press Button 2
to increase value Short Press
Button 1
Long Press
Button 1
EXT DIM WARN
BRITE
External Warning Light Dim
Brightness:
1 = Minimum Brightness
10 = Maximum Brightness
Factory Default is 3
Short Press Button 2
to increase value Short Press
Button 1
Long Press
Button 1