Racelogic Ltd
Quick Start Guide
Page 9
Quick Start Guide
Connections
Mounting DriftBox in your car
1. Connect the cigar lighter adaptor power cable to the power socket on the back of
your DriftBox.
2. Slide DriftBox into the windscreen mounting bracket.
3. Using the suction cups of the windscreen mounting bracket, fix the DriftBox
assembly to a suitable place low down in the centre of your windscreen.
4. DriftBox has an internal GPS antenna, so try to mount DriftBox where it will have
the largest possible view of the sky.
5. Park your vehicle outside in an open area away from obstacles such as tall
buildings and trees.
6. Insert the DriftBox power cable into the vehicle cigar lighter socket. If power is not
permanently available at this socket, turn on the ignition to ensure power at the
socket.
7. The first time DriftBox is used it will need to be left for 10-15minutes to acquire fully
the latest satellite constellation information.
8. After this initial period, DriftBox will then only take 1-2 minutes to lock onto satellites
when you use it next time.
9. Wait for the satellite image to disappear which means lock has been obtained.
10. Before using DriftBox for measuring Drift performance you will need to align the
internal motion sensors.
