Racelogic Ltd
Using DriftBox
Page
13
Changing the Units of Measurement
•
Press the
MENU
button from any of the Display Modes.
•
Highlight UNITS and press
OK
.
•
Highlight SPEED and press
OK
.
•
Highlight KMH or MPH and then press
OK
to tick that selection.
•
Highlight EXIT and press
OK
.
To change the Distance units from metres to feet, follow the same procedure but highlight
DISTANCE and press
OK
.
Satellite Reception
DriftBox calculates all of its logged data from the information it receives from GPS
satellites and relies on being able to get a good lock to produce this data. So it is
imperative that DriftBox (or optional external antenna) is placed in the best possible
position for a clear view of the sky.
The location that you drive in can also affect data quality, if you drive in a very built up area
or an area with overhanging trees then the signal quality can degrade. If the satellite
reception does drop out in use, you will see the following screen and hear three quick
beeps.
Searching for satellites at power up
Whilst the DriftBox is acquiring satellites it will flash the image of a satellite, the location of
the flashing image depends on the screen you are in.
