Racelogic Ltd
Performance Mode
Page
19
This screen shows the current acceleration and peak
acceleration achieved by DriftBox. A level bar at the bottom
of the screen also shows this information in graphical form.
The MAX value is cleared by pressing the
RESET
button.
This screen shows the current deceleration and peak
deceleration achieved by DriftBox. A level bar at the bottom
of the screen also shows this information in graphical form.
The MAX value is cleared by pressing the
RESET
button.
This screen shows the current lateral acceleration and peak
lateral acceleration achieved by the DriftBox. A level bar at
the bottom of the screen also shows this information in
graphical form. The MAX value is cleared by pressing the
RESET
button.
Measuring the 0-60 time of your vehicle
1. Install DriftBox into your vehicle as described in the ‘Quick Start Guide’ section of
this manual.
2. Press the
MENU
button to select the Performance Mode.
3. Now use the
▲▼
buttons to scroll to the ACCEL screen. This screen shows 0-60
in the top right hand corner:
4. The left hand side of the screen shows your live velocity unless you are in an area
of poor satellite reception in which case it flashes an image of a satellite.
5. Now perform your 0-60 acceleration run. As your vehicle goes over 60 mph the time
will instantly show in the 0-60 section of the window.
6. If you come to a stop you will see that this time remains on view. The Vmax section
will also show the highest speed you attained during this particular run.
7. You can now instantly start another 0-60 acceleration, as you pull away the screen
will reset and show your new values as you cross 60 mph.
8. After doing a number of runs you can view your best 0-60 time by scrolling to the
BEST screen.
9. If you have your SD card inserted then your run data will be stored.
