Racelogic Ltd
Drift Mode
Page
14
Drift Mode
Drift Mode is used to measure your drifting ability, showing current and maximum drift
angles and give a grading of your performance as a score between 0 and 10 points.
Scores can be sent to the DriftBox website for publishing on the Top Scores database.
On a fully activated DriftBox an SD card can be inserted to log your scores and data from
your runs that can then be downloaded and viewed on your computer and in the DriftBox
Tools PC software.
The Drift Mode can be used in two different ways; Sectors and Practice. The default is
Practice, but you can turn on Sectors in the Drift Menu.
Practice
Without Sectors enabled, the DriftBox measures a single run at a time, where a run is
defined as anything larger than 5
o
of drift and a speed greater than 25Km/h. The run
finishes when you go below these thresholds. You can then see Peak Drift angle, speed at
which that drift angle occurred, the peak Lateral G during the run and the overall Score
which is based on Lateral G and Drift Angle.
Sectors
When Sector Mode is selected, a run starts at one virtual gate and finishes at another, see
the ‘Sectors’ section later on for more details.
Selecting Sector Mode
To set DriftBox to Sector mode
•
In Drift Mode, press
MENU
•
Select ‘Sectors’, then press the
OK
button.
DRIFT MENU
UNITS
√
SECTORS
SET SECTORS
LOAD SECTORS
