Rabe KORMORAN PL V 180, Руководство по эксплуатации

Страница: 17 / 70

KORMORAN PL V 180 / PL VHA 180
OPERATING INSTRUCTIONS
- 17 -
9901.00.23EN00 - 01/2016
ʈ
One additional plough body at the front (item 1) between
WKHVWDQGQGSORXJKERGLHV7KLVDGGRQLVDQH[WHQVLRQ
to the main chassis and requires the stabiliser to be changed.
The wheel position remains unchanged.
7KHPD[LPXPQXPEHURISHUPLVVLEOHSORXJKERGLHVLV
-
9 for implements with a pin retainer (B).
-
8 for implements with hydraulic or mechanical safety
equipment.
IMPORTANT:
Adding an additional plough body to the front of
WKHLPSOHPHQWLVGLI¿FXOWDSURFHGXUHWKDWPXVWEH
SHUIRUPHGE\TXDOL¿HGVSHFLDOLVWV3OHDVHFRQWDFW
your licensed dealer.
4.3 Wheel block
3
1
2
Key
1 Hydropnemuatic
reservoir
2 the adjusting screw
3 Hydraulic cylinder
The implements with one wheel are equipped with a wheel
block with a lateral arm (single arm). The design of the z-shaped
support enables wheels with large diameter tyres to be installed
and makes removal easier (repair).
The wheel block can be steered. The wheel can be aligned and
the implement steered by actuating the turning system with rack
and pinion.
The wheel is used as a supporting wheel and to transport
the implement. A single-acting cylinder controls the height.
-
When working: The depth can be controlled by adjusting
a screw (item 2). An adjustment arm (item 3) enables the
wheel to be aligned with the implement's pull line.
-
When transporting: A safety stop must be attached, in order to
prevent the chassis falling on the wheel if a hydraulic hose on
the hydraulic lifting circuit breaks. A hydropneumatic reservoir
(item 1) protects the chassis from uneven ground.
1
Key
1 Reservoir
While transporting, raise the wheel cylinder as far as possible
and lower it by half of its stroke so that the reservoir (item 1)
provides a dampening function.
4.4 Working width
1
Key
1
Working width cylinder
The cylinder (item 1) can be used to adjust the working width
between 12" and 20" (0.30 to 0.50 m per body). It controls
a double rod installed outside the support.
ʈ When working: each body's cutting width can be adjusted
LQ¿QLWHO\
ʈ
Close the implement in the 12" position to turn (hydraulically).