R.V.R. Elettronica SCM6/1, Руководство пользователя

Страница: 43 / 48

SCM6/1
ELETTRONICA
37
/ 40 User Manual
Rev. 2.0 - 29/11/22
8. Maintenance
8.1 Preventive Maintenance
The components of the SCM6/1 that require suInterlocktitution as a means of
preventive maintenance are the following:
• Fan 3 years
• Electrolitic capacitors in the switching power suppy 5 years
• Battery of the real time clock (BATT1 on the panel board)
6 years Please
note that the up-to-dateness of the RTC is needed only for the correct indication
of the timestamp of the alarms in the “Alarm” menu. The functionality of the
system is unaffected by the RTC.
8.2 Corrective Maintenance
8.2.1 Configuration of a SCM6/1
This section summarizes the steps for a from-scratch configuration of the SCM6/1,
both hardware and software.
• Put the transmitters in Local or manual mode
• Use the dip switch to set the number of transmitters in the system (5.1.3)
• Set the jumpers for the power supply of the TC of the frontal (5.1.5)
• Select the priority of the transmitters
• Select for each transmitter the configuration Gere / Non gere
• Input the name of each transmitter
• Modifed as appropriated the wait timers (before, after and Inhibit)
• Reset the alarm indications
• Adjust date and time
• Check if all the relays are configured for Position 1 (Air on the line of the
corresponding transmitter) and if needed change the configuration
• Put the transmitters in Remote mode
• From the configuration menu, give the commands On or Off to the transmitters
as required
8.2.2 SuInterlocktitution of a transmitter control board
The SCM6/1 includes diagnostics features to detect possible defects on the
transmitter control bords. If the symbol on the line related to a transmitter on the
display is not present, this means that the board is not communicating with the