ii
User Manual
Rev. 1.0 - 22/08/14
TEX1002LCD
Technical Description
Aggiornato il 18/01/2013
Legenda:
Verde = Green Line
Rosso = Obsoleto
Giallo = Normali
TEX1002LCD
Parameters
U.M.
Value
Notes
Frequency range
MHz
87.5 ÷ 108
Rated output power
W
1000
Continuously variable by software from 0 to maximum
Modulation type
Direct carrier frequency
Operational Mode
Mono, Stereo, Multiplex
Ambient working temperature
°C
-10 to + 50
Whithout condensing
Frequency programmability
From software, with 10 kHz steps
Frequency stability
WT from -10°C to 50°C
ppm
±1
Modulation capability
kHz
150 Stereo, 180 Mono/MPX
Meets or exceeds all FCC and CCIR rules
Pre-emphasis mode
μS
0, 50 (CCIR), 75 (FCC)
selectable by rear panel dip switches
Spurious & harmonic suppression
dBc
<75 (80 typical)
Meets or exceeds all FCC and CCIR rules
Asynchronous AM S/N ratio
Referred to 100% AM,
with no de-emphasis
dB
≥ 65 (typical 70)
Synchronous AM S/N ratio
Referred to 100% AM,
FM deviation 75 kHz by 400Hz sine,
without de-emphasis
dB
≥ 50 (typical 60)
RMS @ ± 75 kHz peak,
HPF 20Hz - LPF 23 kHz,
50 μS de-emphasis
dB
> 80 (typical 85)
Qpk @ ± 75 kHz peak,
CCIR weighted,
50 μS de-emphasis
dB
>73
Qpk @ ± 40 kHz peak,
CCIR weighted,
50 μS de-emphasis
dB
>68
Frequency Response
30Hz ÷ 15kHz
dB
better than ± 0.5 dB (typical ± 0.2)
Total Harmonic Distortion
THD+N 30Hz ÷ 15kHz
%
< 0.1 (Typical 0.07%)
Intermodulation distortion
Measured with a 1 KHz,
1.3 KHz tones,
1:1ratio, @ 75 kHz FM
%
< 0.02
Transient intermodulation distortion
3.18 kHz square wave,
15 kHz sine wave
@75 kHz FM
%
< 0.1 (typical 0.05)
Composite S/N FM Ratio
RMS @ ± 75 kHz peak,
HPF 20Hz - no LPF,
50 μS de-emphasis
dB
> 80 (typical 85)
30Hz ÷ 53kHz
dB
± 0.2
53kHz ÷ 100kHz
dB
± 0.5
THD+N 30Hz ÷ 53kHz
%
< 0.1
THD+N 53kHz ÷ 100kHz
%
< 0.15
Intermodulation distortion
Measured with a 1 KHz,
1.3 KHz tones,
1:1ratio, @ 75 kHz FM
%
< 0.05
Transient intermodulation distortion
3.18 kHz square wave,
15 kHz sine wave
@75 kHz FM
%
< 0.1 (typical 0.05)
Stereo separation
30Hz ÷ 53kHz
dB
> 50 dB (typical 60)
RMS @ ± 75 kHz peak,
HPF 20Hz - LPF 23 kHz,
50 μS de-emphasis,
L & R demodulated
dB
> 75 (78 typical)
Qpk @ ± 75 kHz peak,
CCIR weighted,
50 μS de-emphasis,
L & R demodulated
dB
> 65 dB
Qpk @ ± 40 kHz peak,
CCIR weighted,
50 μS de-emphasis,
L & R demodulated
dB
> 58 dB
Frequency Response
30Hz ÷ 15kHz
dB
± 0.5
Total Harmonic Distortion
THD+N 30Hz ÷ 15kHz
%
< 0.05
Intermodulation distortion
Measured with a 1 KHz,
1.3 KHz tones,
1:1ratio, @ 75 kHz FM
%
≤ 0.03
Transient intermodulation distortion
3.18 kHz square wave,
15 kHz sine wave
@75 kHz FM
%
< 0.1 (typical 0.05)
Stereo separation
dB
> 50 (typical 55)
Main / Sub Ratio
30Hz ÷ 15kHz
dB
> 40 (typical 45)
Frequency response
40kHz ÷ 100kHz
dB
± 0.5
RMS, ref @ ± 75 kHz peak,
no HPF/LPF,
0μS de-emphasis,
with 67 kHz tone on SCA input
@ 7,5kHz FM deviation
dB
> 75 (typical 78)
RMS, ref @ ± 75 kHz peak,
no HPF/LPF,
0μS de-emphasis,
with 92 kHz tone on SCA input
@ 7,5kHz FM deviation
dB
> 78 (typical 80 )
AC Supply Voltage
VAC
230 ±15%
(*) Full range (**) Internal switch
AC Apparent Power Consumption
VA
1450
Active Power Consumption
W
1420
Power Factor
0,998
Overall Efficiency
%
Typical 70
Connector
Terminal Block
DC Supply Voltage
VDC
DC Current
ADC
(*)max 25W (**) max 140W
Front panel width
mm
483 (19")
19" EIA rack
Front panel height
mm
88 (3 1/2") 2HE
convertire in pollici
Overall depth
mm
516
Chassis depth
mm
372
escluso il pannello, esclusi i connettori, convertire in pollici
Weight
kg
about 11
Cooling
Forced, with internal fan
Acoustic Noise
dBA
<75
Connector
XLR F
Type
Balanced
Impedance
Ohm
10 k or 600
Selectable by rear panel dip switches
Input Level /Adjust
dBu
-13 to +13
continuosly variable
Connector
XLR F
Type
Balanced
Impedance
Ohm
10 k or 600
Selectable by rear panel dip switches
Input Level
dBu
-13 to +13
continuosly variable
Connector
BNC
Type
unbalanced
Impedance
Ohm
10 k or 50
Selectable by rear panel dip switches
Input Level / Adjust
dBu
*-13 to +13
for 75 KHz FM, externally adjustable
Connector
2 x BNC
Type
unbalanced
Impedance
Ohm
10 k
Input Level / Adjust
dBu
*-8 to +13
for 7,5 KHz FM, externally adjustable
Connector
XLR F
Type
Balanced
Impedance
Ohm
110
Input Level / Adjust
dBfs
0 to -10
for 7,5 KHz FM, externally adjustable
Connector
TOS-LINk
Type
Optical
Connector
7/8"
Impedance
Ohm
50
Connector
BNC
Impedance
Ohm
50
Output Level
dB
approx. -60
Referred to the RF output
Connector
BNC
For RDS and isofrequency synchronizing purpose
Impedance
Ohm
>5 k
Output Level
Vpp
1
Interlock
Connector
BNC
Input and output for remote power inhibition (short is RF off)
Service
Connector
DB9 F
Factory reserved for firmware program
Remote Interface
Connector
DB15F
IIC + 5 analog / digital inputs, 5 analog / digital outputs
FUSES
On Mains
2 External fuse F 10 A - 6x30 mm
On services
On PA Supply
On Driver Supply
Input device
4 pushbutton
Display
Alphanumerical LCD - 2 x 16
Analogical level
FWD fold
For P.A. A.G.C. purpose, min 0,5 Vcc
Analogical level
REF fold
For P.A. A.G.C. purpose, min 0,5 Vcc
pulse
RF ON
pulse
RF OFF
ON/OFF level
Interlock
for remote power inhibition (short is RF off)
Analogical level
FWD
max 5 Vcc
Analogical level
REF
max 5 Vcc
Analogical level
VPA
max 5 Vcc
Analogical level
IPA
max 5 Vcc
ON / OFF level
Power Good
open collector
Remote connector others
I2Cbus
Remote connector inputs
Remote connector outputs
RF Output
RF Monitor
Pilot output
AUXILIARY CONNECTIONS
HUMAN INTERFACES
TELEMETRY / TELECONTROL
Right
MPX
SCA/RDS
AES/EBU
(optional)
TOS/Link
(optional)
OUTPUTS
DC Power Input
MECHANICAL DIMENSIONS
Phisical Dimensions
VARIOUS
AUDIO INPUTS
Left / Mono
STEREO OPERATION
Stereo S/N FM Ratio
SCA OPERATION
Crosstalk to main or to stereo channel
POWER REQUIREMENTS
AC Power Input
GENERALS
MONO OPERATION
S/N FM Ratio
MPX OPERATION
Frequency Response
Total Harmonic Distortion
