14
/ 26
User Manual
Rev. 1.0 - 22/08/14
TEX1002LCD
Next to
SET
indication, a bar provides a graphic display of preset output power.
The filled portion of the bar is proportional to set power level.
Example
100% ouput power
Full bar
≅
1000W in output
(mod.TEX502LCD)
25% ouput power
1/4 bar
≅
250W output
(mod.TEX1002LCD)
The bottom line provides instantaneous power reading (in this example 1000W for
TEX1002LCD
); press button to increase level, press to decrease it. When
you have achieved the desired level, press
ENTER
to confirm and exit the
default
menu
. Please note that the setting is stored automatically; in other words, if you
press
ESC
or do not press any keys before the preset time times out, the latest
power level set will be retained.
NOTE:
This feature prevents the machine from delivering maximum power as
soon as output is enabled from menu 4, or in the event the machine is already
set to
ON
and energised.
2) Ensure that machine is not in a locked-out state. Press the
ESC
key to call up
the selection screen (Menu 3). Highlight
Fnc
and press
ENTER
to confirm and
access the appropriate menu (menu 4).
In the same menu, ensure that power limiting is disabled: if
PWR
is set to
OFF
,
i.e. power output is disabled, move cursor to
PWR
. Press
ENTER
and label
will switch to
ON
, i.e. power output enabled.
Press
ESC
twice to go back to the
default menu
(menu 1).
3) Fine tune power setting from menu 2 (see description of item 1b) until achieving
the desired value.
WARNING: Machine is capable of delivering more than rated output power
(1000 W); however, never exceed the specified power rating.
Next, you can review all operating parameters of the machine through the
management firmware.
Normally, the machine can run unattended. Any alarm condition is handled
automatically by the safety system or is signalled by the LED indicators on the
panel or by display messages.
NOTE: Standard factory settings are: output power set to upper limit (unless
otherwise specified by customer) and
OFF
.
