22
/ 26
User Manual
Rev. 1.0 - 22/08/14
TEX1002LCD
RF section on / off control signals are treated as control signals for RF output
power level to allow for UP/DOWN setting.
The UP or DOWN command is provided by switching the corresponding signal at
the connector to ground for at least 500mS (pin features internal pull-up to power
supply).
Configuration of DB15F telemetry connector (Remote):
Pin Standard function
Power UP/DOWN function
14 On cmd
Up cmd
Enables RF output power
Increases RF output power
15 Off cmd
Down cmd
Disables RF output power Decreases RF output power
5.5.3 RDS Option
Built-in RDS system with standard basic functions.
NOTE: For further informations, read WINRDS manual
5.5.4 Internet Telemetry Option
Telemetry system via the Internet.
NOTE
: For further informations, read /TLW manual
5.5.5 Basic Internet Telemetry Option
Basic telemetry system via the Internet.
NOTE
: For further informations, read /TLW-E manual
5.5.6 Telemetry Option with built-in modem
Telemetry system via internal GSM modem. Battery and battery changer
included.
NOTE
: For further informations, read /TLM manual
5.5.7 Telemetry Option without built-in modem
Internal telemetry system without modem.
NOTE
: For further informations, read /TLC manual.
