QWICK KURB
®
, INC.
Long Term Installation Manual
5. Tilt the new marker/bollard top edgeways so that you can force one bolt through
one of the holes sufficiently enough to install the washer and thread the nut several
turns.
6. Tilt the new marker/bollard top to the other side, so that you can force the other
bolt through its hole, and install the washer and thread the nut several turns.
7. Tighten both nuts firmly.
8. Firmly press down on the new marker/bollard top to
pop
the teeth through the
slots in the reboundable Flex Boot.
9. Bend the new fully assembled marker/bollard back and forth to test that the
teeth have passed through the reboundable Flex Boot.
Phone: 800-324-8734
Fax: 813-645-4856
www.qwickkurb.com
1/21/2016
35
