QWICK KURB
®
, INC.
Long Term Installation Manual
STORAGE
To retain
QWICK KURB
®
’s yellow or white color and the optimum reflectivity of the
markers/bollards and L65 Reflective Arcs after each use, the units should be pressure
washed before storage. The yellow and white L60 SEPARATOR units may be stored
outside, off the ground, and covered with a tarp. Stack the one-meter units in a doubled
crosshatch pattern. Stack a base row of four (4) one-meter L60 SEPARATOR units on the
bottom parallel to one another, and nest three (3) L60 SEPARATOR units upside-down in
the cavities between the base row L60 SEPARATOR units. Next, create another base of four
(4) parallel L60 SEPARATOR units, perpendicular to the direction of the lower base, and
again nest three (3) L60 SEPARATOR units upside-down. Continue in this pattern up to a
maximum of sixty-three (63) L60 SEPARATOR units, i.e., nine rows of seven L60
SEPARATOR units (Fig 11).
Do not stack randomly, or leave parts of the sections unsupported. Proper stacking will
keep the L60 SEPARATOR from warping or breaking. Do not stack higher than
approximately four (4) feet unless there is support on all sides. Do not double stack pallets.
Regularly inspect stacked L60 SEPARATOR units to insure that there is no leaning. Shrink-
wrap and band when possible.
We recommend that the L 65 Reflective Arcs, S65 black Securing Arcs, and
markers/bollards be stored under cover, because long exposure to sunlight and moisture
degrades reflective sheeting and these plastics.
NOTE: You may leave the L65 Reflective Arcs attached if palletized.
Care must be taken to insure that units are cross-stacked as directed, and tied down securely
and not so high that they fall if jarred; otherwise personal injury and damage may result.
Pallets must be strong enough to support the combined weight, and be located on a solid
foundation to avoid leaning.
STACK OF 63 L60
SEPARATORS
Fig 11
Phone: 800-324-8734
Fax: 813-645-4856
www.qwickkurb.com
1/21/2016
28
