QWICK KURB
®
, INC.
Long Term Installation Manual
To set the L60 SEPARATOR units:
1.
Always
begin installation with an L61
Male
End unit (the End unit with the steel
hook). Place it into position with the slope toward the beginning of the set-up (Fig
1). For panels with single-sided sheeting (uni-drive traffic situations) always install
the L60 SEPARATOR in the direction of the traffic flow to insure that the sheeting
will face the correct direction when slid into the slot on the L60 SEPARATOR.
NOTE: You can add to an existing installation by removing the L62 Female End unit and
continuing with L60 SEPARATORS if further extension is needed.
Fig 1
Install the remaining
QWICK KURB
®
in this direction.
Phone: 800-324-8734
Fax: 813-645-4856
www.qwickkurb.com
1/21/2016
15
