©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
54
[IO output]:
Enable or disable alarm output.
[Alarm Output duration]:
Set the alarm duration after being triggered
(in seconds). The duration range is between
0 - 86400s. 0 means that there is no limit for
alarm output.
[Snapshot]:
When alarm is triggered, the pictures can be
send via email or FTP. For snapping
parameters; if the number of pictures
snapped at one time is set as 10, and the
snapping interval is 1 second, this means
when there is an alarm, 10 pictures will be
snapped and the interval between each
picture is 1 second.
[Record]:
When the alarm is triggered, the video files
can be sent to a recipient email or an FTP
server (see
7.4.6 FTP settings)
.
After setting all the parameters, click ‘Save’ to make the parameters valid.
Attention:
Recorded video/picture file packet time continues according to the duration
of alarm. To set the recording time duration see [Record] within the ‘Linkage
Alarm Output’ section.
7.7.2
Sensor Detection
See Figure 38 for the “Sensor Detection” interface:
Figure 38
