©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
16
5. Open Internet Explorer and enter one of the camera IP addresses in to
the address bar.
6.
Log in with Username: admin Password: admin
7. Select Config on the top of the web page.
8. Select Network.
9. Change the HTTP Port to 81 and the ONVIF Port to 80.
10. Save these settings.
11.
Restart the NVR when all cameras have been modified.
2.2.3 Connection over LAN network (without DHCP server)
The following steps will describe how to connect the camera to the NVR
over a Local Area Network (LAN), via an external POE switch.
These instructions need to be followed only if you are connecting the
camera to the NVR over a network that does not have a DHCP server
involved with it.
1.
Connect the camera to a POE switch connected to the same network
the NVR is connected to. Because the network has no DHCP server,
the camera will not have an IP automatically assigned to it. You will
need to know the network’s range and manually assign an IP address
to the camera (the NVR will need to be in the same range as well).
2.
Install the ‘Device Search’ software tool on to the PC or laptop (the
software will be on the ‘Resource’ disc that comes with the camera).
3.
When the software tool has been installed, click the ‘Search’ button to
find the camera on the network (see previous page).
4.
Select the camera on the list and then click on the ‘Set’ button to open
up the ‘Network Parameters’ set up window (see image on next the
page).
