©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
53
7.7
Alarm Settings
7.7.1
Motion detection
See Figure 37 for the “Motion detection” interface:
Figure 37
Users can set the camera to detect motion and send alarm trigger actions
when movement is detected. A number of alarm trigger operations can set,
these include an email alert, audible alarm siren, snapshot or record video.
[Motion Detection Area]:
Left click and move the mouse to set the
surveillance areas (4 areas max).
[All]:
Set the whole video frame as motion
detection area.
[Clear]:
Clear all motion detection areas.
[Sensitivity]:
Sensitivity range is between 1~5. The greater
the value the higher the sensitivity.
[Enable]:
Enable or disable motion detection.
[Time]:
Set the period of time for when the motion
detection function is active, two periods max.
[Linkage Alarm output]:
Supports Email, IO output, snapshot and
record.
[E-mail]:
Send motion detection alarm messages
to users via E-mail, details about
E-mail setting please refer to [Network
Settings].
