©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
40
Note:
After revising and saving parameters, the device will restart. If it is
applied within the LAN, please pay attention - to avoid IP address conflict.
7.5.3
PPPOE Settings
See Figure 25 for the ‘PPPOE setting’ interface:
Figure 25
[Enable]:
Enable or disable PPPOE dial-up function.
[IP]:
After setting up the device dial-up successfully, it will
display the public IP Address.
[Username]:
ADSL dial-up account, obtain from the IP service
provider.
[Password]:
ADSL dial-up password, obtain from the IP service
provider.
[Online time]:
Start the timer after dial-up to see the online duration
after successful dial-up.
After you set these parameters, please click to make them valid.
