MAIN SCREEN AREA
This area will contain different information dependent on the
current operating Mode of the control system. The area is also
used to display general system information, when necessary.
DRIVE MODE SCREEN (Fig
21
.13)
Displays symbols relevant to the drive control of the wheelchair.
CURRENT PROFILE (Fig
21
.14)
This denotes the currently selected Profile, shown in numeric
form.
SPEED INDICATOR (Fig
21
.15)
This gives a graphical display of the wheelchairs speed. As the
speed increases, the needle will move around the arc, covering
the background with the white highlight.
The display is scaled between zero speed and the speed
corresponding to the
programmable
parameter, Max Displayed
Speed.
DIGITAL SPEED DISPLAY (Fig
21
.16)
This displays the actual speed of the wheelchair in digital form.
The display can be set to mph or km/h, or can be turned
off. These options are set by the program
m
able parameter,
Display Speed.
MAX SPEED INDICATOR (Fig
21
.17)
This displays the current maximum speed setting.
When the left-hand segment is illuminated, then the speed
setting corresponds to the programmed minimum forward,
reverse and turning speeds.
The indicator will never show a lower setting, i.e. the left-hand
segment will always be fully illuminated.
When all segments are fully illuminated, then the speed setting
corresponds to the programmed maximum forward, reverse
and turning speeds.
ODOMETER (Fig
21
.18)
This displays the total distance the wheelchair has travelled or
the trip distance since the last reset. This selection is made in
the Settings Menu. Refer to Settings Menu further in this
section of the manual.
The display can be set to mph or km/h, or can be turned off.
These options are set by the same program
m
able parameter
that affects the digital speed display, i.e. Display Speed.
Fig.
21
.13
Fig.
21
.15
Fig.
21
.14
Fig.
21
.16
Fig.
21
.17
Fig.
21
.18
660ft
249044 Rev. A
82
R-Net Control System w/Omni2
Содержание R-net
