11.2 Safety Checks
The electronic circuits in your control system have been
designed to be extremely safe and reliable. The on-board
microcomputer carries out safety checks at up to 100 times per
second. To supplement this safety monitoring you should carry
out the following periodic checks.
If the control system fails any of these checks, do not use the
wheelchair and contact your authorized dealer.
Daily Checks
Joystick:
With the control system switched off, check that the joystick is
not bent or damaged and that it returns to the center when you
push and release it. If there is a problem do not continue with
the safety checks and contact your authorized dealer.
Weekly Checks
Parking brake:
This test should be carried out on a level floor within a clear
and
safe area around the wheelchair.
1. Switch on the control system.
2. Check that the Screen/ Battery Gauge remains on after
initialization and that the battery gauge is displaying a
reasonable amount of charge.
3. Push the joystick slowly forwards until you hear the parking
brakes operate. The chair may start to move.
4. Immediately release the joystick. You must be able to hear
each parking brake operate within a few seconds.
5. Repeat the test a further three times, pushing the joystick
slowly backwards, left and right.
Connectors:
Make sure that all connectors are securely mated.
Cables:
Check the condition of all cables and connectors for damage.
Joystick gaiter:
Check the thin rubber gaiter or boot, around the base of the
joystick shaft, for damage or splitting.
Check visually only, do not handle the gaiter.
Mounting:
Make sure that all the components of the control system are
securely mounted. Do not overtighten any securing screws.
11.3 Servicing
To ensure continued satisfactory service, we suggest you
have your wheelchair and control system inspected by
your authorized dealer after a period of 1 year from
commencement of service. Contact your authorized dealer
for details when the inspection is due.
AUTHORIZED
DEALER DETAILS
and
CONTACT PHONE
NUMBERS
249044 Rev. A
33
R-Net Control System w/Omni2
Содержание R-net
