Fig.5.12
Fig.5.13
Fig.5.14
Fig.5.15
Fig.5.16
Fig.5.17
9 LED (Fig 5.14
)
The parking brakes have a bad connection. Check the parking
brake and motor connections. Make sure the control system
connections are secure.
10 LED (Fig 5.15
)
An excessive voltage has been applied to the control system.
This is usually caused by a poor battery connection. Check the
battery connections.
7 LED + Speed
LEDs
(Fig 5.16)
A communication fault is indicated. Make sure that the joystick
cable is securely connected and not damaged.
Actuator
LEDs
Flash (Fig 5.17)
An Actuator trip is indicated. If more than one actuator is fitted,
check which actuator is not working correctly. Check the
actuator wiring.
Slow or sluggish movement /
Maximum Speed / Profile Indicator Flashes
If the wheelchair does not travel at full speed or does not
respond quickly enough, and the battery condition is good,
check the maximum speed setting. If adjusting the speed
setting does not remedy the problem then there may be a non-
hazardous fault.
If your speed indicator is flashing, your chair is in an inhibit.
Bring all power seating options to the upright position and
lower seat if elevated. If your speed indicator continues to
flash, contact your authorized dealer for service.
Speed Indication LEDs
An increasing number of
LEDs
illuminated shows the
maximum speed setting. For example, if the setting is speed
level 4, then the four left hand
LEDs
will be illuminated.
Profile Indication
LEDs
A single LED illuminated shows the selected drive profile. For
example, if drive profile 4 is selected, then
only the fourth LED
from the left will be illuminated.
Maximum Speed / Profile Indicator Ripples Up and Down
This indicates the control system is locked; refer to
section
15.15
for details.
249044 Rev. A
22
R-Net Control System w/Omni2
Содержание R-net
