QubicaAMF Options Ball Return, Инструкция по установке, эксплуатации, обслуживанию и каталог запасных частей

Страница: 9 / 46

I
NSTALLATION
Options Ball Return Installation Manual – 612-860-010
3
Rev. Date 10/07
HAND GUARD KIT
If upgrading your existing Options Ball Return with the 252-002-147 Hand Guard Kit,
Install it as shown and described below. The guard reduces the likelihood of someone
placing his or her hand inside the ball return in the area where the ball exits the lift or
where there are moving parts.
The installation utilizes much of the lift’s existing
hardware.

Turn OFF power and remove the Hood before installing the hand guard.

Separate the urethane wear strip from its backing (see A above for location) and insert
the upper mounting screws (item 5) so that the screw heads are covered by the urethane
strip.

Install the guard’s upper mounting flange on top of the lift’s upper cross brace. (see B
above.)

Secure the guard’s side flanges to the inside of the lift’s side plates, and install the edge
trim to protect the bowling balls as they leave the lift.
Parts List
Item Number Part Number Description Quantity
1 252-002-143 Options Ball Lift Hand Guard 1
2 04-069 Edge Trim 14.75”
3 838-849-007 Nut, ¼-20, Nylon Locking 2
4 948-722-111 Flat Washer, 5/16 6
5 809-849-125 Screw, ¼-20 x ¾, Hex 2
3
B
Hand Guard Installation
A