QubicaAMF Options Ball Return, Инструкция по установке, эксплуатации, обслуживанию и каталог запасных частей

Страница: 19 / 46

I
NSTALLATION
Options Ball Return Installation Manual – 612-860-010
13
Rev. Date 10/07
I
NSTALLING THE
B
ALL
R
ACK
A
ND
O
PTIONAL
L
OWER
R
ACK
NOTE: The Ball Rack and Pedestal Leg are shipped in separate boxes.
1. Attach the pedestal leg (259-001-028) to the underside of the Ball Rack’s center
cross member using two 5/16-18 x 3/4 hex screws (7010-003118-075) and lock
washers (951-156-002). See Figure 10.
Figure 10, Leg Assembly to Rack Installation
2. Install the lower rack brace (259-001-0038) to the underside of the ball rack’s cross
member that is closest to the blower using 5/16-18 x x1 button head cap screws
(808-557-160) and split lock washers (951-156-002).
3. Install the lower rack (259-001-030) onto the upper rack so that the lower rack
straddles the pedestal and mounts to the underside of the lower rack leg as shown
in Figure 11.
a. Attach the lower rack to the pedestal leg using a 5/16-18 x 6-1/2 hex screw (810-
157-001), two flat washers (948-722-111), one per side, and a 5/16-18 hex lock
nut (844-057-002).
3/4
3/8
3/8