QubicaAMF Options Ball Return, Инструкция по установке, эксплуатации, обслуживанию и каталог запасных частей

Страница: 22 / 46

I
NSTALLATION
Options Ball Return Installation Manual – 612-860-010
16
Rev. Date 10/07
F
RONT
C
OVER
I
NSTALLATION
1. Insert the access panel so the slot of the mounting bracket (252-002-133) straddles
the hex cap screw/stud, so that the bracket is under the mounting bracket of the ball
rack (and any C -washers), and above the grommet bushing of the ball lift mounting
bracket as shown in Figure 13.
Figure 13, Ball Lift to Ball Rack to Hood Attachment
2. Align the holes in the mounting bracket with the holes in the side of the hood, as
shown in Figure 14.
3. Secure the bracket to the hood with the screws (809-849-165), split washers (951-
148-008), and flat washers (948-753-102). Firmly tighten the screws.
4. Remove the access panel from the mounting bracket.
Set aside the screws (809-849-165), split washers
(951-148-008), and flat washers (948-753-102).
5. Reach through the opening under the mounting
brackets and firmly tighten the 1/2-13 hex nut onto the
hex cap screw/stud.
6. Reattach the access panel to the mounting bracket
with the hardware you set aside.
7. Firmly tighten the nuts and screws for all connections
and attachments.
8. Remove any installation markings that remain on the
approach surface.
Slot
Ball Rack Mounting
Bracket
Hood Mounting Bracket
Ball Lift
Mounting Bracket
Figure 14, Mounting Bracket
to Hood Attachment