QubicaAMF 400288005, Руководство по установке

Страница: 9 / 147

BES X installation manual
P/N: 400288005; Rev: L, 09/21 iii
Hazards and Indicators
During the installation of the components of the BES X ™ system, you will be exposed to potentially hazardous
situations. To alert you to a possible hazard, the following symbol is shown with the step.
This symbol is “shorthand” for the warning and
instructions in the text-box to the left. When you see this
symbol, follow the instructions for the step carefully and
ensure you have performed the following actions:
Before installing the BES X system, read and understand
the maintenance instructions. Contact Technical Support
for clarification if you do not understand a maintenance
task or have any questions.
Additionally, follow the safety precautions listed below:
•
Before installing, removing, or replacing electronic equipment, be certain that the power supply to the
unit has been turned OFF at the main circuit breaker box.
•
Before turning on power to the BES X ™ system, be sure that all cables have been connected properly —
especially the main power cables.
•
DO NOT connect any of the power cords for any of the components to “live” outlets until all components
have been installed or you may damage the components.
•
If you are doing the installation while your bowling center is in use, do not allow bowling on the lanes
where you are installing the system or on the lanes to either side of where you are working.
•
Wear safety glasses when drilling.