QubicaAMF 400288005, Руководство по установке

Страница: 84 / 147

Overhead monitors BES X installation manual
74 P/N: 400288005; Rev: L, 09/21
7.3 How to enable the “Just Scan” (or “Screen Fit”) and “HDMI-CEC”
capabilities on monitors supplied by QubicaAMF
When using monitors supplied by QubicaAMF, follow one of the procedures listed below that depend on the
brand / model of the monitors, in order
to enable the “Just Scan” (or “Screen Fit”) capability.
ACCUVISION MONITORS Gen.3 and Gen.4:
How to enable the control “HDMI - CEC”:
•
Enter the main menu of the monitor by pressing once the “Menu” button on the remote control.
•
Once the main menu screen has appeared on the monitor, press in a fast sequence the following
buttons on the remote control: “Menu”, “9”, “6”, “3”, “2”.
•
Navigate to the “TV Control” setting and press “OK” on the remote control.
•
Set the control “HDMI - CEC” (this setting lets the cont rol commands to be executed through the HDMI
cable).
•
Once finished, press many times the “Menu” button on the remote control to exit from the menu.
ACCUVISION MONITORS Gen.2, Gen.3 and Gen.4:
How to enable the “JUST SCAN” option:
If the image displayed on the monitor is larger than the monitor screen, follow this procedure in order to
have a correct aspect ratio:
•
Press once the “Menu” button on the remote control.
•
Enter the main menu of the monitor by pressing once the “Menu” button on the remo te control.
•
Once the main menu screen has appeared on the monitor, press in a fast sequence the following
buttons on the remote control: “Menu”, “9”, “6”, “3”, “2”.
•
Navigate to the sub menu “Aspect Ratio”.
•
Select “Just Scan” and press “OK” on the remote co ntrol.
•
Once finished, press many times the “Menu” button on the remote control to exit from the menu.
SAMSUNG MX SERIES MONITORS:
How to enable the “JUST SCAN” (or “Screen Fit”) option:
If the image displayed on the monitor is larger than the monitor screen, follow this procedure in order to
have a correct aspect ratio:
•
Enter the main menu of the monitor by pressing once the “Menu” ( ) button on the remote
control.
•
Navigate to the “Picture” menu, using the arrow buttons and press the “Enter” ( ) button on the
remote control.
•
Navigate to the “Size” sub menu and press the “Enter” ( ) button on the remote control.
•
Select the “Just Scan” (or “Screen Fit”) option and press the “Enter” ( ) button on the remote
control.
•
Once finished, press many times the “Exit” ( ) button on the remote control to exit from the menu.