Quantum SNC 4500, Руководство пользователя

Страница: 11 / 122

SNC 450x User’s Guide 5
Serial Port
The RS-232 serial port is an RJ-11 connection used to connect this port to the serial port on a service
computer. The position of the RS-232 serial port on an SNC 4500 can be seen in
Figure 8 on page 19. The
position of the RS-232 serial port on an SNC 4501 is shown in Figure 9 on page 19.
The serial port provides support for remote monitoring and management when you use a terminal session
to access the command line interface (CLI).
The serial port is configured at:
• Baud rate: 115,200 bits per second
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: None
• Terminal type: ASCII
• Echo: off
Operating Specifications
This section contains the physical, electrical, and environmental specifications for the SNC 4500 and SNC
4501.
SNC 4500 Dimensions
• Depth: 33.02 cm (13 in.)
• Height: 4.37 cm (1.72 in.)
• Width: 48.26 cm (19 in.)
• Weight: 4.53 kg (10 lbs.)
SNC 4501 Dimensions
• Depth: 17.78 cm (7 in.)
• Height: 7.62 cm (3 in.)
• Width: 15.24 cm (6 in.)
• Weight: 1.13 kg (2.5 lbs)
Operating Environment
The operating environment is as follows:
• Operating temperature: 10° to 40°C (50° to 104°F) external
• Blower and airflow: Be sure there is sufficient airflow to the rack or library.
Note
To configure the management port IP address, you must use either the serial
port or the library operator panel.