90
Management Port Command Reference
set IPSubnetMask [port number] [IP address]
The
IPSubnetMask
command controls the current subnet mask if DHCP is not enabled where the string
xxx.xxx.xxx.xxx is the subnet mask. The default setting is “255.255.0.0." Refer to
get IPSubnetMask [port
number]
on page 69. This command must be followed by
saveConfiguration restart
.
Ready.
set ipsubnetmask all 255.255.0.0
Ready.*
set iSCSIAlias [alias]
The
set iSCSIAlias
command provides a human-readable name for the SNC when using CHAP
(Challenge-Handshake Authentication Protocol) in the iSCSI protocol. Aliases are up to 64 characters long
and can contain spaces if spaces are enclosed in quotation marks. If you enter the command with no alias
parameter, the alias is removed. The default setting is “ADIC SNC 450x." Refer to
get iSCSIAlias
on page
69. This command must be followed by
saveConfiguration norestart
.
Ready.
set iscsialias dev1 "ADIC SNC 4501"
Ready.*
set iSCSIChap [status]
The
set iSCSIChap
enables or disables the CHAP (Challenge-Handshake Authentication Protocol) used
for iSCSI protocol. If enabled, the SNC tries to negotiate CHAP authentication using the CHAP secret. Refer
to the command
iSCSIChapSecret
below. An initiator can reject this negotiation. The default setting is
“disabled." Refer to
get iSCSIChap
on page 69. This command must be followed by
saveConfiguration
norestart
.
Ready.
set iscsichap dev1 enabled
Ready.*
set iSCSIChapSecret [password type|delete] [account name] <secret>
The
set iSCSIChapSecret
command specifies the incoming and outgoing passwords, called secrets, for
iSCSI CHAP sessions. The
restoreConfiguration default
command sets the secrets to default values.
Port Number
Meaning
mp0
Ethernet management port labeled Ethernet port 2
dp0 or dp1
Ethernet data port labeled Ethernet port 0 or Ethernet port 1
all
All Ethernet port connections
CAUTION
Contact ATAC before using this command.
Status
Meaning
enabled
The SNC tries to negotiate CHAP authentication.
disabled
The SNC does not try to negotiate CHAP authentication.
Содержание SNC 4500
