Quantum DLT 2000, Руководство по эксплуатации продукта

Страница: 320 / 345

Definition of Vendor Unique Sense Data Information
DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem B-3
Table B-1 Internal Status Code (cont’d)
Dec Hex Description
40 28 Invalid source slot
41 29 Invalid destination slot
42 2A Source slot empty
43 2B Destination slot full
44 2C Medium changer motion error
45 2D Medium changer/drive interface error
46 2E Medium changer/slot interface error
47 2F Medium changer mechanical error
48 30 Medium changer hardware error
49 31 Medium changer controller error
50 32 Unrecognized medium changer subcommand
51 33 Medium changer fatal error
52 34 Medium changer is in manual mode
53 35 68020 detected communication error w/ Servo area
54 36 68020 detected drive command timeout
55 37 Calibration failure
56 38 Bad tape format
Table B-2 Internal Status Bit Flags
Bit No. Description
0 If set, cleaning light is on, otherwise it is off
1-2 Tape directory status:
•
0 Good status
•
1 Unknown status
•
2 Directory partially bad
•
3 Directory bad
3-6 Reserved
7
If set, the internal status byte (18) is in Bit Flags format; otherwise, it is a
code.