Quantum DLT 2000, Руководство по эксплуатации продукта

Страница: 90 / 345

Configuring and Operating the DLT2500 Mini-Library
4-26 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsytem
__________________________NOTE ____________________________
Never apply labels to the top or bottom of tape cartridges. Doing so can
cause cartridge jams in the mini-library. Use the space on the front of the
cartridge for labels.
____________________________________________________________
4.10.3 Removing the Magazine from the Mini-Library
To remove the magazine from the mini-library, first ensure the OCP is enabled or
unlocked via the key lock (Figure 4-3).
Then:
1. If a tape is loaded in the drive, press the Load/Unload button to unload the tape
from the drive and load it into the magazine. Press the Open button (Figure 4-5) to
open the door of the mini-library. (Pressing just the Open
button also returns the
tape to the magazine and opens the door.)
2. Slide the door all the way to the left.
3. Grasp the magazine's handle and pull the magazine out of the mini-library.
4.10.4 Installing the Magazine into the Mini-Library
To install the magazine into the mini-library, open the mini-library door by pressing the
Open button.
__________________________CAUTION _________________________
Do not force open the magazine door manually. Always use the Open
button to open the door electronically
____________________________________________________________
Ensure the door is moved all the way to the left.
1. Hold the magazine by the handle (Figure 4-7) and slide the magazine into the mini-
library doorway. Since the magazine is slotted, you can insert the magazine in the
correct orientation only.
2. Slide the door to close.
3. Ensure the door is fully closed before you proceed.