Quantum DLT 2000, Руководство по эксплуатации продукта

Страница: 126 / 345

Troubleshooting Guide for the DLT2500/DLT2700 Mini-Library
6-6 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem
6.5.5 DLT2500 Unknown Error Description
The ERR UNK message tells you the mini-library detected an error of unknown origin.
In some unknown errors, the mini-library retries the error three times before showing
failure.
6.5.5.1 DLT2500 Clearing a Loader, Drive, Controller, or Unknown Error
When you press the Load/Unload button, the mini-library attempts to clear the error.
When you press the
Open button, the door opens to let you access the magazine.
If you still cannot clear the error, call your service representative.
6.6 DLT2700 Error Conditions
Error indications fall into two main categories:
•
Magazine Fault
−
In most cases, this is an operator-correctable condition, indicated
when the Magazine Fault light is on. If you cannot resolve the fault, call your
service representative.
•
Loader Fault
−
This condition most likely requires service from a service
representative. It is indicated when the Loader Fault light is on.
6.6.1 DLT2700 Magazine Fault Cases
A magazine fault can occur during any of the following cases:
1. A cartridge has been removed from the magazine incorrectly.
__________________________Note _____________________________
This can only occur if the loader has been opened in service mode and
cannot occur under normal operation.
____________________________________________________________
2. A cartridge was manually unloaded from the drive.
3. A cartridge that was loaded into a drive by the loader was manually unloaded and
put back into the magazine.
4. A cartridge was manually inserted into the drive.
When these conditions are present, the Magazine Fault light turns on, indicating a
situation that can be corrected by the operator. Eject is also on to inform you that this is
the only function available at this time.