Quantum ACL 4/52, Дополнительное руководство

Страница: 121 / 160

ACL 4/52 Software Interface Guide
Document 6211225-03
Version 3.0
Introduction A-7
Table is sorted by data in the ASC column
B 80 01 TRANSFER FULL - AT END OF PLACE
Gripper has cartridge in it at end of a place operation
(Move Medium with a target other than the Transfer).
Move cartridge to empty storage element using Move
Medium command. Retry command.
Both
B 80 06 TRANSFER EMPTY - COMMAND ABORTED
Gripper does not contain cartridge at end of pick
portion of Move Medium command.
Both
2 80 07 SYSTEM IS STOPPED (BUTTON IS CURRENTLY
PUSHED)
The Control Panel STOP button was pressed. Press the
STOP button.
Both
6 80 07 SYSTEM STOP BUTTON WAS PRESSED (MAY
CURRENTLY BE PRESSED)
The Control Panel STOP button was pressed. Press the
STOP button. Retry command.
Both
6 80 08 LOGICAL UNIT TURNED ON-LINE
The library is ready to communicate with the host
computer. Press the Control Panel
STANDBY switch to
take the library off-line.
Diag
2 80 09 LOGICAL UNIT IS TURNED OFF-LINE
The library is ready to communicate with the diagnostic
PC. Press the Control Panel
STANDBY switch to place
the library on-line.
SCSI
6 80 09 LOGICAL UNIT STANDBY BUTTON WAS PRESSED
Retry command.
SCSI
B 80 10 LOAD RETRY FAILED
ACL 4/52 was unable to successfully load the drive,
even after retries. Check drive alignment. If problem
continues, drive may need servicing.
Both
Sense
Key
ASC ASCQ
Message Name/Description Interface