Quantum ACL 4/52, Дополнительное руководство

Страница: 126 / 160

ACL 4/52 Software Interface Guide
Document 6211225-03
Version 3.0
A-12 Introduction
Table is sorted by data in the ASC column
4 84 23 VERTICAL POSITION OVERFLOW
The position step counter overflowed. Issue a Rezero
Unit command.
Both
4 84 24 VERTICAL HARDWARE ERROR
Vertical actuator or sensor has failed.
Both
4 84 30 VERTICAL MAPPING FAILURE
Scanner was unable to detect vertical target during
calibration.
Both
4 84 31 VERTICAL CONFIRMATION FAILURE
Unable to locate all confirmation flags. Check flag
sensor and cable connections. Check for obstructions on
vertical rail. If failure repeats, run vertical self-test.
Both
B 85 01 HORIZONTAL TIMEOUT
Horizontal axis did not reach desired position within
the time limits. Retry command. If failure repeats, use
the Diagnostic Software to run horizontal self-test.
Both
4 85 03 HORIZONTAL MECHANICAL POSITION ERROR
Horizontal axis did not reach desired position. Retry
command. If failure repeats, use the Diagnostic
Software to run horizontal self-test.
Both
4 85 08 HORIZONTAL HOME NOT FOUND
Horizontal axis did not reach the home position. Issue
Rezero Unit and retry command. If failure repeats, run
horizontal self-test.
Both
B 85 10 HORIZONTAL INVALID ACTUATOR START
POSITION
Position of horizontal axis is unknown. Issue a Rezero
Unit command.
Both
Sense
Key
ASC ASCQ
Message Name/Description Interface