Quantum ACL 4/52, Дополнительное руководство

Страница: 122 / 160

ACL 4/52 Software Interface Guide
Document 6211225-03
Version 3.0
A-8 Introduction
Table is sorted by data in the ASC column
4 80 0A NVRAM CHECKSUM FAILURE
Nonvolatile RAM contents are corrupted. Ensure
nonvolatile RAM ICs are seated correctly. Use the
Diagnostic Software to initialize nonvolatile RAM and
calibrate system.
Both
B 80 0B COMMAND ABORTED BY USER
Informational message. No action is necessary.
Both
B 80 0D CARTRIDGE IS ONLY PARTIALLY GRIPPED (ONLY
SEEN IN THE FRONT SENSOR).
Issue a Move Medium command to move the cartridge
from the transfer element to an empty storage element.
Both
4 80 0F LOW POWER ERROR
Check power connections.
Both
4 80 11 MOTOR POWER FAILURE
Indicates motor power turned off for a reason not
otherwise reported. Toggle of the Stop button should
clear.
Both
5 80 22 ELEMENT CONTENTS UNKNOWN
The contents of an element address are unknown. Issue
a Read Element Status for the element address. If
contents are still unknown issue an Initialize Element
Status command.
Both
4 80 23 BAR CODE DECODER COMMUNICATION FAILURE
Unable to initialize decoder. Verify that the decoder is
powered on. Cycle power and/or check cable
connections.
Both
B 81 01 GRIPPER TIMEOUT
Gripper did not reach desired position. Issue a Rezero
Unit command.
Both
Sense
Key
ASC ASCQ
Message Name/Description Interface