Qualstar RLS-8350, Техническое и сервисное руководство

Страница: 45 / 111

511010 Rev. 07-01-19
The Private 5-7
5.2.2 Valids and Rho Elevator Corrections Screen
Figure 5-7 The Valids and Rho Elevator Corrections Screen
This screen shows which elements of the calibration process have been successfully
completed and the value of the mechanical position corrections determined during
calibration. The values on this screen should only be edited by an authorized service
technician.
Information on this screen may be edited by pressing the Edit button. Note that
changes to the screen will not be saved until the Save button is pressed. Pressing the
Cancel button will remove all of the current editing.
Section Field Description Option
Calibration Valid Drive A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Elevator Lower A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Elevator Upper A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Ioport Left A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Ioport Right A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Opto A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Magazine Left A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Magazine Right A Yes means this element of the calibra-
tion process was successfully completed. Yes or No
Rho Elevator Correction Elevator Lower Calibrated mechanical position corrections –
Elevator Upper Calibrated mechanical position corrections –
Table 5-2 Calibration/Theta and Y Corrections Screen Information