Step 3: Installing Rear Brackets to
Door Surround
3
FIG 2
Passenger
side Pillar
Assembly
Driver
side Pillar
Assembly
Passenger side Rear Over-
Door Assembly
Rubber
Seal
Allen Head Screws
for Door Surround
4mm Allen
Wrench
Passenger Front door surround
Driver Front door surround
Driver side Rear Over-Door Assembly
FIG 3
FIG 5
FIG 4
Step 2: Rear Over Door Surround
Assembly
Allen Head
Screws for
Brackets
Rear Brackets
FIG 6
Left
Right
Left
Right
FIG 7
FIG 9
Line up the Driver’s side rear over-
door assembly and the driver’s side
Pillar assembly, insert the screws into
the two vertical holes and using the
included 4mm Allen wrench, tighten
these screws securing the two pieces
as shown in fig 4 & 5. Repeat the above
assembly on the passenger side rear
over door and pillar assemblies.
Insert the two screws on each bracket
and tighten to secure as shown in fig. 8.
Locate the driver’s side rear over door
assembly, the rubber seal, the driver’s
side Pillar assembly and the long Allen
head screws/ nuts (Fig 2). Place the
rubber seal on the driver’s side pillar
assembly (Fig 3).
Locate the (4) brackets and (8) Allen
head screws (Fig 6). On the rear driver’s
side door surround, place the bracket
according the same color (door surround
and bracket), making sure the holes line
up. See fig. 7.
FIG 8
See fig 9 to make sure the brackets are
correctly positioned.
Repeat the assembly on the passenger
side.
