Important Safety information
Your QuadraTop® Fabric Replacement
Top is intended to be used with other
QuadraTop Products to increase the
fair weather enjoyment of your off-road
capable vehicle. Before installation,
please take a moment to review the
following safety information and installa
-
tion instructions. Important safety infor
-
mation is generally preceded by one of
three signal words indicating the relative
risk of injury.
The signal words mean.
a hazardous situation which, if not avoided, could result in death or serious in-
jury. You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions.
WARNING
CAUTION
NOTICE
a hazardous situation which, if not avoided, could result in minor or moderate
injury. You CAN be moderately HURT and also may suffer property damage if
you don’t follow instructions.
Careful attention is required to this instruction or operation but does general-
ly not relate to personal injury. Damage to your Quadratec® product or other
property may result if you don’t follow instructions.
Before you begin Installation:
We are excited that you have chosen
the Adventure Top. This high-quality soft
top is designed to provide protection
from the elements and a stylish look
on your Jeep®. Please note that it is
important that you become familiar with
the installation process of this top by
reading the following instruction sheet
and warnings thoroughly.
For a smooth fit and ease of installation, this top should be installed at tem
-
peratures above 72 degrees. Below this temperature, the fabric may contract an
inch or more making it difficult to install. We highly recommend taking the top
out of the package and letting it sit inside a warm place or direct sunlight for
1-2 hours before you install the top. When warm, this top will install quickly.
NOTICE
2
Once the components are removed
from the shipping box, locate the front
and rear door surround components
and accessories as shown in FIG1.
FIG 1
4mm Allen Wrench
Allen Head
Screws for
Door Surrounds
Allen Head
Screws for
Brackets
Door Surround
rear Brackets
Rear Bracket
screws 12mm
with Nuts
Left
Right
Left
Right
Rubber
Seal
Carefully
organize the door surround
components
as shown in Fig.1 making
sure the passenger side and driver’s
side components are separated.
When unpacking, carefully check to
make sure all parts are included. If any
part is missing or broken, please call
Quadratec customer service at 800-745-
6037.
Step 1: Un-packing & Organizing the Door Surrounds:
Put on safety glasses. Carefully remove all the contents of the large shipping
box onto a table top or onto the gro
und
on top of a soft towel.
Knobs
Driver Side Door Surround
Passenger Side Door Surround
