9
FIG 41
FIG 42
FIG 43
Step 10: Installing the Side and
Rear Windows Continued
Once both quarter windows and the
upper portion of the rear window are
secured to the top deck, line up the
driver’s side rear zipper on the Quarter
window to the zipper on the rear
window and zip it down a few inches
(FIG 41).
Repeat th
e above
on the passenger
side of the
vehicle
. You may have to
lift
the quarter window up to secure
this
second zipper a few inches. Once
both side zippers are attached, zip the
rear window zippers down about half
way
(Fig 42).
You will close these zippers
completely at the end of the install.
Go inside the vehicle and locate the
second and third center bow hook and
loop flap sewn into the top deck. Wrap
this flap around the second & third
center bow securing the top deck to
the bows (FIG 43).
When removing the quarter and rear windows from the Top deck be sure to
slide them out completely before pulling down. Disengage the side hook and
loop before sliding the windows out. DO NOT “Peel” the windows out! Failure
to completely disengage the windows from the “C” Channel will damage the
Top and quarter window!
NOTICE
FIG 63
Each Time you remove the windows:
Completely pull the windows out of the “C” Chan
-
nel before pulling the windows down!
Do not “Peel” the windows out. See Fig 44.
FIG 44
There may be times when the “P” extrusion may come out of the “C” Channel
ends due to extreme downward pressure. This is normal. If this occurs, slide
the “P” extrusion out of the C channel and re install securing the window back
into the “C” Channel.
NOTICE
The Bow flap over the center speak-
er bar will be difficult to reach. If you
have trouble, release the front header
and fold it back to give yourself more
room to work.
