7
Step 8: Installing the top Deck and
Front Windshield channel Continued
Loosen the
front
bow mount brackets
mounted on the door surround. With
the help of a friend, lift each of the bow
legs over the bow mount bracket (Fig
27).
Repeat the above on the other side of
the vehicle.
FIG 27
Step 9: Installing the top Deck
With the front header folded back
towards the rear of the vehicle (Fig
28), locate the spring assembly at
-
tached to the over door cable. Attach
the spring end to the bracket under the
rear door surround as shown in figs 29,
30 & 31.
Important Note:
As shown in Fig 31,
the cable when installed should be on
the outside of the door surround.
FIG 28
FIG 30
FIG 31
FIG 29
FIG 32
FIG 32a
In-case the over door cable bec
ame
disconnected
in shipping
, you will need
attach it to the bracket on the header, as shown in figures 32 and 32a.
Once lined up with the bow mount
bracket, install the header assembly by
pulling out the quick release knob and
push over the mount until you hear a
“click” (Fig 27). The front header should
now easily rest on top of the wind
-
shield when folded down. Tighten the
Bow mount brackets on the front door
surround.
