background image

 14 

 

 

 

 

                       7080-166B 

 

 

 

 

   April 18, 2018

TREKKER

Figure 14.1 - Fire pot with large clinker

Clinker

Figure 14.2

C.  General Maintenance and Cleaning

1.  Cleaning Fire pot using Lever
•  Frequency:

 Daily or as needed*

•  By:

  Homeowner

a.  Be sure the appliance is allowed to cool. 

b. 

Open cast face of appliance

c. 

Pull fire pot floor cleaning lever two times until the ash 

falls into the ash pan below. 

Figure 14.2

d. 

It may be necessary to use your fire pot clean-out tool 

to chip away material that has built up on the sides of 

the fire pot and to push out any clinkers. 

Figure 16.1

e. 

Larger clinkers may have to be removed from the 

top of the fire pot. 

f. 

If the clinker adheres to the sides of the fire pot, 

you will need to manually clean the fire pot. The fire 

pot floor plate must be fully closed when finished.

2. Cleaning Ash Pan

•  Frequency:

  Weekly or every 3-5 bags

•  By:

  Homeowner

a. 

Locate the ash pan underneath the fire pot. 

b. 

Slide the ash pan straight out. 

c. 

Empty into a non-combustible container and re-install 

ash pan. 

d. 

When replacing ash pan push it back until it catches 

on the 2 side latches. 

 

Clinkers filling the ash pan will have to be cleaned out more 

often than ash. 
Ash Disposal:

Ashes  should  be  placed  in  a  steel  container  with  a  tight-

fitting lid.  The container of ashes should be moved outdoors 

immediately  and  placed  on  a  non-combustible  floor  or  on 

the ground, well away from combustible materials, pending 

final disposal.  
If the ashes are disposed of by burial in soil or otherwise locally 

dispersed, they should be retained in the closed container until 

all cinders have thoroughly cooled. Other waste shall not be 

placed in this container.

3.  Ash Removal from Firebox
•  Frequency:

  Weekly or more frequently depending on     

 

ash build-up

•  By:

  Homeowner

a.  Be sure the appliance is allowed to cool. 

b.  There must not be any hot ashes in the firebox during 

cleaning. 

c. 

Frequent cleaning of the ash in the firebox with a 

vacuum cleaner will help slow down the build-up of 

ash in the exhaust blower and vent system.

RISK OF FIRE

Keep combustible materials, gasoline and other flam

-

mable vapors and liquids clear of appliance.

•  Do NOT

 store flammable materials in the appli

-

ance’s vicinity.

•  Do NOT use gasoline, lantern fuel, kerosene, charcoal lighter 

fluid or similar liquids to start or “freshen up” a fire in this heater.

Keep all such liquids well away from the heater while it 

is in use as combustible materials may ignite.

WARNING

4.  Cleaning Heat Exchanger & Drop Tube
•  Frequency:

  Monthly or every ton of fuel (50 bags).

•  By:

  Homeowner

NOTE:  

Heavy duty vacuum cleaners may be obtained, spe

-

cifically designed for solid fuel appliance cleaning. 

Содержание TREKKER-CSB





































Отзывы: