August 3, 2018
7050-145L
23
SANTA FE FREESTANDING
E. Optional Log Set Placement Instructions
2 Piece Log Set Installation
1.
Open door to expose the firebox.
2.
Install the left log first and then the right log (
Figure
23.1).
3. Lean the logs against the cast iron brick in the back of
the firebox.
4. Push the logs to the far left and far right against the
sides of the firebox (
Figure 23.2).
5. To clean the logs, use a vacuum and a soft brush
attachment or a paint brush.
Figure 23.2
Figure 23.1
CAUTION
Logs are FRAGILE. Use extreme care when handling or
cleaning logs.
NOTE:
Due to the abrasive nature of a pellet appliance
fire, the logs are not covered under warranty. Any
placement variation other than shown here can
cause excessive heat and shall void the appliance
warranty.
