Quadra-Fire SANTAFE-MBK, Руководство по установке

Страница: 21 / 28

August 3, 2018 7050-145L 21
SANTA FE FREESTANDING
Silicone Rear
Exhaust Outlet
Offset Adapter
(812-3570)
Use Hole on Each
Side as Drilling Guide
Vent Adapter
(TPVNT-2)
Drill Holes in back of
appliance and secure with 4
screws, 2 on each side
Clean-Out Cover
B. Top Vent Adapter Installation
3 to 3 inch Top Vent Adapter
3 to 6 inch Top Vent Offset Adapter
Installing the Top Vent Adapter
1. Put a layer of high temperature silicone on the 3 inch
(76mm) exhaust outlet. Do not put silicone inside of
pipe (Figure 21.1).
2. Slide the top vent adapter onto the rear exhaust outlet
and adjust the assembly to a vertical position ( Figure
21.1).
3. Drill 4 holes with #26 drill bit (provided) into the back of
the appliance using the outer shield as a pattern (make
sure the assembly is vertical) ( Figure 21.2).
4. Install the 4 mounting screws.
5. Drill 2 holes with #26 drill bit through the rear exhaust
outlet using the 2 holes already in the short horizontal
pipe in the top vent adapter as a guide. Install the 2
screws ( Figure 21.1).
6. Install the vent pipe into the top vent adapter (be sure
to silicone all joints).
7. To clean the top vent adapter open the clean-out cover
( Figure 21.2).
C. Rear Vent & Rear Vent to Top Vent Adapter
Installation
1. Put a layer of high temperature silicone on the 3 inch
(76mm) exhaust outlet.
Do not put silicone inside of
pipe (Figure 21.1).
2. Slide the adapter onto the rear exhaust outlet and
adjust the assembly to the appropriate position.
3. Install the vent pipe into the adapter (be sure to silicone
all joints).
Clean-Out Cover
Rear Vent
Adapter
(811-0620)
Clean-Out
Cover
Top Vent
Adapter
(TPVNT-6)
Figure 22.3 - Rear Vent Adapter (811-0620)
Figure 21.4 - Top Vent Adapter (TPVNT-6)
Figure 21.2
Figure 21.1