ON
LY
1
3
4
5
2
(1) saddle with assem-
bled seatpost. On Luxus
unicycles, a second seat-
post is also in the box
(2) wheel with cranks
and tire
(3) unicycle frame
(4) lower bearing cups,
nuts, screws (from down
to top)
(5) pedals
(left and right side)
box content:
Handling
• Before each use of the device, always check all screw and plug connections as well as the
respective safety devices for their correct seating.
• Instruct children in particular in the correct use of the sports equipment and draw their
attention to possible dangers.
• Adjust the saddle height to the body size (explanation on the following pages)
• Do not transport any objects on the vehicle.
• Do not use any aggressive or corrosive agents for cleaning and care.
• If the unicycle is placed on floors that contain or are bonded to solvent-containing substanc-
es (e.g. PVC), there is a risk of staining due to a chemical reaction with the natural product
rubber. If in doubt, place masking material under the wheels.
• Pay attention to the correct tyre pressure (values are located on the sidewall of the respec-
tive tyre); too low a pressure increases wear and makes driving more difficult!
Assembly instructions
• Make sure that the vehicle is only used after it has been properly installed and checked by an
adult.
• The installation must be done carefully and by an adult person. Please take a close look
at these assembly instructions before starting the actual work. Within the individual illus-
trations, the assembly sequence may be specified by letters. Follow the installation steps
exactly to ensure safe use and function.
• Please note that there is always a possible risk of injury when using tools and doing crafts.
• Therefore, proceed carefully and cautiously with the assembly of the device!
• Ensure a safe working environment, e.g. do not leave any tools lying around. For example,
dispose of packaging material in such a way that it does not present any danger. Danger of
suffocation for children with foil/plastic bags!
• Please screw all parts loosely first and check that they are properly seated. First tighten the
self-locking nuts by hand until you feel resistance, then tighten them correctly against the
resistance (clamp locking) with a spanner. Check all screw connections for secure tightening
after the assembly step. Attention: Loosened safety nuts become unusable (destruction of
the clamping device) and must be replaced by new ones.
• For manufacturing reasons, we reserve the right to pre-assemble components (e.g. pipe
plugs).
